ORTOLED 5K K Series – 270W Full Spectrum LED Indoor Grow Light
The ORTOLED 5K K Series is an LED lamp for indoor cultivation designed to provide advanced, efficient and customisable lighting throughout the various stages of plant development.
Thanks to its 10-band Full Spectrum technology, 4 lighting channels and a combination of COB LEDs and traditional LEDs, the ORTOLED 5K offers a versatile solution for grow boxes, indoor greenhouses and controlled growing environments.
With a rated power of 270W and an actual power consumption of approximately 180W, this LED plant lamp combines energy efficiency, light coverage and spectral control.
High-Penetration EPI® COB LED Technology
The ORTOLED 5K incorporates a lighting system comprising 2 EPI® COB LEDs of 63W each and 40 3W LEDs.
This combination is designed to promote effective light distribution and good light penetration even in areas of vegetation partially shielded by branches and leaves.
COB technology allows the light output to be concentrated, whilst the additional LEDs help to complete the spectrum required for indoor cultivation.
TOTAL AGRO Full Spectrum 10-Band Light Spectrum
One of the main strengths of the ORTOLED 5K LED lamp is the 10-band TOTAL AGRO system, with wavelengths ranging from 380 nm to 740 nm.
The spectrum includes UV and infrared components and is designed to provide lighting tailored to the plants’ needs during the various stages of cultivation.
4 Lighting Modes
The ORTOLED 5K features four lighting modes, which can be managed via the compatible control system:
- VEGETATIVE: lighting designed for the vegetative stage.
- GROWTH: a spectrum designed for plant development.
- FLOWERING: lighting specifically for the flowering stage.
- TOTAL AGRO: a combination of the available light spectra for comprehensive lighting.
The light channels can be used individually or in combination, allowing the spectrum to be adapted to the needs of the crop.
Important: without the K CONTROL control unit, the lamp operates with the preset TOTAL AGRO spectrum.
Wireless Control with the K CONTROL Controller
The ORTOLED 5K K Series is compatible with the K CONTROL accessory, a wireless control unit that allows you to customise the operation of your indoor lighting.
With K CONTROL, you can:
- Manage and combine the different light spectra.
- Adjust the light intensity.
- Programme operation at set intervals.
- Activate the SUNRISE/SUNSET simulation function.
- Control multiple lamps simultaneously.
- Manage lamps that are not physically connected in series.
The K CONTROL wireless control unit is sold separately.
Cascade Connection: Up to 8 ORTOLED Lamps
For larger installations, the ORTOLED 5K supports daisy-chaining of up to 8 K Series lamps.
Using the dedicated Plug & Play connection cable, you can configure multiple units into a single lighting system, making it easier to manage indoor installations.
The Plug & Play cable is sold separately.
Light Coverage and Energy Efficiency
The ORTOLED 5K LED lamp, with an actual power consumption of 180W, is designed to illuminate areas ranging from 0.4 to 1.2 m², depending on the height and positioning of the lamp.
The minimum recommended distance between the lamp and the plants is 35 cm.
With a stated photonic efficiency of 1.9 µmol/J, the ORTOLED 5K offers a lighting system designed to combine high light output with low energy consumption.
The manufacturer states that its power output is equivalent to that of a traditional 350W HPS lamp or a compact fluorescent lamp of similar power.
Key Features of the ORTOLED 5K
- LED lighting for indoor cultivation.
- Declared nominal power of 270W.
- Actual power consumption of 180W ±5%.
- 2 EPI® COB LEDs, 63W each.
- 40 additional 3W LEDs.
- TOTAL AGRO Full Spectrum with 10 bands.
- 4 modes: Vegetative, Growth, Flowering and TOTAL AGRO.
- Light spectrum from 380 to 740 nm.
- UV and infrared components.
- Compatible with the K CONTROL wireless control unit.
- Scheduled timing and sunrise/sunset simulation with K CONTROL.
- Cascade connection for up to 8 lamps.
- Light coverage from 0.4 to 1.2 m².
- Declared photonic efficiency of 1.9 µmol/J.
ORTOLED 5K K Series Technical Data Sheet
| Features | Specifications |
|---|---|
| Brand | ORTOLED |
| Model | ORTOLED 5K K Series |
| Type | Indoor LED grow light |
| Rated power | 270W |
| Actual power consumption | 180W ±5% |
| COB LEDs | 2 x 63W EPI® COBs |
| Additional LEDs | 40 × 3W LEDs |
| Light spectrum | TOTAL AGRO – 10 bands |
| Wavelengths | 380–740 nm |
| Lighting modes | 4: Vegetative, Growth, Flowering, TOTAL AGRO |
| Coverage area | 0.4–1.2 m² |
| Minimum distance from plants | 35 cm |
| Power supply | AC 85–265 V / 50–60 Hz |
| Claimed photonic efficiency | 1.9 µmol/J |
| Cascade connection | Up to 8 lamps |
| Wireless control | K CONTROL (optional) |
| Dimensions | 220 × 420 × 70 mm |
| Net weight | 3.2 kg |
| Operating temperature | -10°C to +50°C |
| Maximum operating humidity | 85% |
| Declared certifications and protection rating | CE, RoHS, IP50 |
| Water resistance | Not waterproof |
| Declared equivalence | 350W HPS or compact fluorescent |
Why Choose the ORTOLED 5K LED Lamp?
The ORTOLED 5K K Series is ideal for those seeking a full-spectrum LED lighting system for indoor cultivation, with the option to customise the light spectrum via an optional wireless control.
The combination of EPI® COB technology, the 10-band TOTAL AGRO spectrum, light channel management and daisy-chain connectivity makes this lamp suitable for both single installations and lighting systems comprising multiple units.
Choose ORTOLED 5K and improve the lighting management of your indoor grow with Series K LED technology.
Recalculation in progress …
