CANNA - HYDRO FLORES A+B
CANNA Hydro Flores A+B is a professional two-part fertiliser for the flowering stage, developed for inert growing media using a run-to-waste system. The formula provides chelated micro-nutrients in a form that can be absorbed directly. It is used in conjunction with Hydro Vega A+B, the nutrient for the growth phase.
What is CANNA Hydro Flores A+B used for?
Hydro Flores A+B is the two-component fertiliser for the flowering stage in hydroponic systems using inert substrates with a run-to-waste system.
Compared to the vegetative stage, the ratio of nitrogen, phosphorus and potassium changes, and the chelated trace elements complete the nutrient supply in readily available forms.
It should be used in conjunction with the Hydro Vega growth-phase formula. The HYDRO range is not the same as the AQUA range, which is designed for recirculating systems.
Technical data sheet
| Hydro two-phase fertiliser for flowering | |
| 400 ml of A and 400 ml of B per 100 L (4 ml/L each; 1:250); pH 5.2–6.2 | |
| Flowering | |
| Dilute A and then B; check drainage | |
| Hydroponics |
Formulation and product selection
Parts A and B belong to the same range and must be used together, kept separate until added to the water.
Monitoring the complete solution and the preparation sequence remain important throughout the flowering stage.
Instructions for use
The recommended dilution is 400 ml of A and 400 ml of B per 100 L of water, equivalent to 4 ml/L per component. Fill the tank, add A, mix, and then add B.
The pH should be between 5.2 and 6.2. The frequency of watering and drainage should follow the HYDRO programme and the conditions of the growing medium.
Related products
- CANNA Boost Accelerator — Supports flower development and the plant’s metabolism during the flowering stage.
- CANNAZYM — An enzymatic complex for the growing medium.
CANNA: research and programmes for every growing medium
Since the early 1990s, CANNA has been developing fertilisers and growing media for growers using soil, coconut fibre or hydroponics. Its approach stems from a practical question: what changes when the growing medium changes? This has led to the creation of distinct product ranges, comprising base nutrients and complementary products designed to be used in sequence. Research, testing and consultation with growers are integral to the company’s history, which aims to make the choice of programme – from the first nutrient to the additives – as straightforward as possible.
CANNA states that it carries out research, laboratory testing and formulation development in-house. According to its presentation, the development of a new product takes on average around two years: a process that involves the design of specific product ranges for different growing media and cultivation systems.
CANNA Grow Schedule: Hydro
Download the original fact sheet
| Stage | Weeks | Hours of light | Hydro Vega A/B | Hydro Flores A/B | Rhizotonic | Cannazym | Cannaboost | PK 13/14 | EC+ (mS/cm) | Total EC (mS/cm) |
|---|---|---|---|---|---|---|---|---|---|---|
| Growth | ||||||||||
| Start / rooting (3–5 days) | <1 | 18 | 10–20 | – | 40 | – | – | – | 0.7–1.1 | 1.1–1.5 |
| Vegetative phase I | 0–3 | 18 | 15–25 | – | 20 | 25 | – | – | 0.9–1.3 | 1.3–1.7 |
| Vegetative phase II | 2–4 | 12 | 20–30 | – | 20 | 25 | 20 | – | 1.2–1.6 | 1.6–2.0 |
| Flowering | ||||||||||
| Generative period I | 2–3 | 12 | – | 25–35 | 5 | 25 | 20–40 | – | 1.4–1.8 | 1.8–2.2 |
| Generative period II | 1 | 12 | – | 25–35 | 5 | 25 | 20–40 | 15 | 1.5–1.9 | 1.9–2.3 |
| Generative period III | 2–3 | 12 | – | 15–25 | 5 | 25 | 20–40 | – | 1.0–1.4 | 1.4–1.8 |
| Generative period IV | 1–2 | 10–12 | – | – | – | 25–50 | 20–40 | – | 0.0 | 0.4 |
Dosage in ml per 10 litres of water. Add the EC of tap water to the recommended EC. Recommended pH as per the original data sheet.
CANNA Hydro Flores A+B is a professional two-part fertiliser for the flowering stage, developed for inert growing media using a run-to-waste system. The formula provides chelated micro-nutrients in a form that is directly absorbable. It is used in conjunction with Hydro Vega A+B, the nutrient for the growth phase.
What is CANNA Hydro Flores A+B used for?
Hydro Flores A+B is the two-component fertiliser for the flowering stage in hydroponic systems using inert substrates with a run-to-waste system.
Compared to the vegetative stage, the ratio of nitrogen, phosphorus and potassium changes, and the chelated trace elements complete the nutrient supply in readily available forms.
It should be used in conjunction with the Hydro Vega growth-phase formula. The HYDRO range is not the same as the AQUA range, which is designed for recirculating systems.
Technical data sheet
| Hydro two-phase fertiliser for flowering | |
| 400 ml of A and 400 ml of B per 100 L (4 ml/L each; 1:250); pH 5.2–6.2 | |
| Flowering | |
| Dilute A and then B; check drainage | |
| Hydroponics |
Formulation and product selection
Parts A and B belong to the same range and must be used together, kept separate until added to the water.
Monitoring the complete solution and the preparation sequence remain important throughout the flowering stage.
Instructions for use
The recommended dilution is 400 ml of A and 400 ml of B per 100 L of water, equivalent to 4 ml/L per component. Fill the tank, add A, mix, and then add B.
The pH should be between 5.2 and 6.2. The frequency of watering and drainage should follow the HYDRO programme and the conditions of the growing medium.
Related products
- CANNA Boost Accelerator — Supports flower development and the plant’s metabolism during the flowering stage.
- CANNAZYM — An enzymatic complex for the growing medium.
CANNA: research and programmes for every growing medium
Since the early 1990s, CANNA has been developing fertilisers and growing media for growers using soil, coconut fibre or hydroponics. Its approach stems from a practical question: what changes when the growing medium changes? This has led to the creation of distinct product ranges, comprising base nutrients and complementary products designed to be used in sequence. Research, trials and consultation with growers are integral to the company’s history, which aims to make the choice of programme – from the first nutrient to the additives – as straightforward as possible.
CANNA states that it carries out research, laboratory testing and formulation development in-house. According to its presentation, the development of a new product takes on average around two years: a process that involves the design of specific ranges for different growing media and cultivation systems.
CANNA Grow Schedule: Hydro
Download the original fact sheet
| Stage | Weeks | Hours of light | Hydro Vega A/B | Hydro Flores A/B | Rhizotonic | Cannazym | Cannaboost | PK 13/14 | EC+ (mS/cm) | Total EC (mS/cm) |
|---|---|---|---|---|---|---|---|---|---|---|
| Growth | ||||||||||
| Start / rooting (3–5 days) | <1 | 18 | 10–20 | – | 40 | – | – | – | 0.7–1.1 | 1.1–1.5 |
| Vegetative phase I | 0–3 | 18 | 15–25 | – | 20 | 25 | – | – | 0.9–1.3 | 1.3–1.7 |
| Vegetative phase II | 2–4 | 12 | 20–30 | – | 20 | 25 | 20 | – | 1.2–1.6 | 1.6–2.0 |
| Flowering | ||||||||||
| Generative period I | 2–3 | 12 | – | 25–35 | 5 | 25 | 20–40 | – | 1.4–1.8 | 1.8–2.2 |
| Generative period II | 1 | 12 | – | 25–35 | 5 | 25 | 20–40 | 15 | 1.5–1.9 | 1.9–2.3 |
| Generative period III | 2–3 | 12 | – | 15–25 | 5 | 25 | 20–40 | – | 1.0–1.4 | 1.4–1.8 |
| Generative period IV | 1–2 | 10–12 | – | – | – | 25–50 | 20–40 | – | 0.0 | 0.4 |
Dosage in ml per 10 litres of water. Add the EC of tap water to the recommended EC. Recommended pH as per the original data sheet.
CANNA Hydro Flores A+B for hard water is a two-part mineral fertiliser for the flowering stage in hydroponic systems. This variant is formulated for water with a higher mineral content than soft water, so as to adapt the programme to the quality of the available water.
What is CANNA Hydro Flores A+B for hard water used for?
Hydro Flores A+B for hard water is a two-part mineral fertiliser for the flowering stage in hydroponic systems using inert substrates, with a flush-through solution.
Chelated trace elements complete the nutrient supply during the flowering stage. The HYDRO range is distinct from the AQUA range, which is designed for recirculating systems.
The full name must be used when selecting the product, as this variant is specifically intended for hard water.
Technical data sheet
| Hydro two-phase nutrient for flowering, hard water | |
| 21–35 ml of A and 21–35 ml of B per 10 L, according to the stage indicated in the CANNA Hydro HW calendar; pH 5.2–6.2 | |
| Flowering | |
| Dilute A and then B; check drainage | |
| Hydroponics; variant for hard water |
Formulation and product selection
Parts A and B must be used together and kept separate until added to the water.
The choice between the standard formulation and the hard water formulation should be based on the water source, not simply on the similarity of the names.
Directions for use
Dilution follows the CANNA Hydro HW schedule: 21–35 ml of A and B per 10 L, depending on the growth stage. Fill the reservoir, add A, mix, and then add B.
The pH is between 5.2 and 6.2. Watering frequency and drainage should follow the HYDRO programme and the conditions of the growing medium.
Related products
- CANNA Boost Accelerator — Supports flower development and the plant’s metabolism during the flowering stage.
- CANNAZYM — An enzyme complex for the growing medium.
CANNA: research and programmes for every growing medium
Since the early 1990s, CANNA has been developing fertilisers and growing media for growers using soil, coconut fibre or hydroponics. Its approach stems from a practical question: what changes when the growing medium changes? This has led to the creation of distinct product ranges, comprising base nutrients and complementary products designed to be used in sequence. Research, trials and consultation with growers are integral to the company’s history, which aims to make the choice of programme – from the first nutrient to the additives – clearer.
CANNA states that it carries out research, laboratory testing and formulation development in-house. According to its presentation, the development of a new product takes on average around two years: a process that involves the design of specific product ranges for different growing media and cultivation systems.
Recalculation in progress …