BIOBIZZ - LEAFT COAT
INDOORLINE - BIOBIZZ LEAF·COAT | NATURAL FOLIAR PROTECTIVE AND REVITALISING TREATMENT
Biobizz Leaf·Coat is a ready-to-use, natural foliar revitaliser and protector formulated with organic latex, designed to strengthen the plant and shield it from pest infestations, fungal diseases and sudden changes in temperature. Once sprayed directly onto the foliage, it creates an invisible, elastic protective layer just 1.5 microns thick. This thin film is permeable to air and light but self-degrades within 2 weeks under the action of sunlight, ensuring that the plant continues to breathe and carry out photosynthesis without altering the aroma of the fruit.
Leaf·Coat regulates leaf evapotranspiration: when temperatures exceed 28 °C, it helps the plant retain moisture and prevents excessive transpiration, whilst in cold spells it protects the leaves from low temperatures. It offers an environmentally friendly, suitable and safe alternative to synthetic chemical pesticides, providing mechanical protection for plants against harmful insects and fungal spores.
Key features
- A 100% organic, ready-to-use natural latex revitalising product (no dilution required)
- Creates an ultra-thin 1.5-micron film that is permeable to light and air
- Acts as a mechanical barrier and natural repellent against pests, insects and fungi
- Regulates evapotranspiration, protecting plants from excessive heat (>28 °C) and winter cold
- Facilitates rooting and reduces stress in cuttings and clones
- An eco-friendly alternative to chemical pesticides: non-toxic, biodegradable within 2 weeks and does not alter the flavour of the crop
Technical specifications
- Type: Ready-to-use organic latex foliar protector and revitaliser
- Manufacturer: Biobizz World Organics
- Formulation: Ready-to-use liquid for use with a sprayer
- Coating thickness: 1.5 microns (biodegradable in approximately 14 days)
- Use: From the vegetative stage up to 2 weeks before harvest
Directions for use
- Do not mix with water: The product is ready for direct application
- Shake the bottle and spray evenly over all leaf surfaces (top and bottom) and flowers
- Repeat the application twice a week until approximately 15 days before the end of flowering
- Within a few hours of application, a protective, elastic layer will form, which will last for up to two weeks before breaking down naturally
Recommended products
- Biobizz Alg·A·Mic: A seaweed-based revitaliser, ideal for adding to irrigation water to provide a combined shock treatment against thermal and environmental stress.
- Biobizz Bio·Down: A biological pH-lowering regulator, perfect for keeping the irrigation water within optimal parameters during treatment with Leaf·Coat.
Leaf·Coat is a ready-to-use, natural latex-based foliar spray that strengthens the plant and protects it from certain insects and leaf fungi. It forms a permeable, biodegradable barrier on the leaf, which allows air and light to pass through, and is designed for high temperatures – above 28 °C – and for the colder months. It is not absorbed by the leaf and does not alter the flavour of the fruit; it is available in sizes ranging from 500 ml to 10 L.
What is BioBizz Leaf·Coat used for?
Leaf·Coat is a ready-to-use leaf protectant based on natural latex. It is sprayed directly onto the leaves and forms a thin, permeable film that allows air and light to pass through.
The protection is external: the product is not absorbed by the plant and is not a fertiliser to be applied to the roots.
It is recommended for reducing water loss through evaporation and for preventing leaf pests and fungal diseases, as an alternative to synthetic pesticides.
Key features
Ready-to-use foliar protectant: no dilution required. Forms an elastic film of approximately 1.5 microns on the leaves.
Biobizz recommends approximately two applications per week. Stop treatment two weeks before the end of flowering.
Technical data sheet
| Ready-to-use foliar protectant | |
| Do not dilute | |
| Approximately 2 applications per week; stop 2 weeks before the end of flowering | |
| Spray directly onto leaves and flowers | |
| Foliar application |
How the Leaf·Coat film forms and how long it lasts
After application, an elastic film approximately 1.5 micrometres thick forms on the leaf within a few hours. It remains active for up to two weeks and breaks down naturally when exposed to light.
Its uniform application to leaves and flowers, in a ready-to-use form, distinguishes Leaf·Coat from a foliar fertiliser that requires dilution.
Directions for use
The liquid must not be diluted: apply it straight from the bottle, preferably using a sprayer, approximately twice a week up to two weeks before the end of the flowering period.
Apply it separately from nutrient-enriched watering. For product format and application method, please refer to the packaging you have purchased.
Technical data sheet
Recommended products
- Alg·A·Mic — A revitalising treatment derived from cold-pressed seaweed.
- Root·Juice — Supports the early stages of the programme with a formulation combining humic acids and seaweed.
How it works and when to use it
Leaf•Coat is ready to use and does not need diluting: apply directly from the bottle, preferably using a spray bottle, thoroughly covering leaves and flowers approximately twice a week until two weeks before the end of flowering. After a few hours, a thin, elastic layer, approximately 1.5 microns thick, forms on the leaf; this remains active for up to two weeks before breaking down when exposed to light.
At temperatures above 28 °C and in high humidity, the film reduces water loss through evaporation; in winter, it helps to maintain the temperature of the leaves. The product is not absorbed by the plant and therefore does not alter the flavour of the fruit. It is recommended for the prevention of insects and leaf fungi as an alternative to synthetic pesticides.
Biobizz: growing in harmony with nature
Biobizz’s story began in 1992 in Groningen, the Netherlands, as a small family business with a clear vision: to put organic cultivation at the heart of everything. Since then, the range has expanded to include fertilisers, growing media and growth stimulators designed to support the different stages of plant growth. Close to its headquarters, the Little Netherlands experimental greenhouse provides the company with a space in which to observe crops and refine its formulations. This philosophy appeals to those who wish to build their own growing programme based on the soil and natural methods.
In 2020, Biobizz announced a two-year technical collaboration with NEIKER, the Basque Institute for Agricultural Research. The project included comparative studies on fertilisers and performance tests in various growing media: a concrete example of the brand’s focus on research applied to organic farming.
Leaf·Coat is a ready-to-use, natural latex-based foliar spray that strengthens the plant and protects it from certain insects and leaf fungi. It forms a permeable, biodegradable barrier on the leaf, which allows air and light to pass through, and is designed for high temperatures – above 28 °C – and for the colder months. It is not absorbed by the leaf and does not alter the flavour of the fruit; it is available in sizes ranging from 500 ml to 10 L.
What is BioBizz Leaf·Coat used for?
Leaf·Coat is a ready-to-use leaf protectant based on natural latex. It is sprayed directly onto the leaves and forms a thin, permeable film that allows air and light to pass through.
The protection is external: the product is not absorbed by the plant and is not a fertiliser to be applied to the roots.
It is recommended for reducing water loss through evaporation and for preventing leaf pests and fungal diseases, as an alternative to synthetic pesticides.
Key features
Ready-to-use foliar protectant: no dilution required. Forms an elastic film of approximately 1.5 microns on the leaves.
Biobizz recommends approximately two applications per week. Stop treatment two weeks before the end of flowering.
Technical data sheet
| Ready-to-use foliar protectant | |
| Do not dilute | |
| Approximately 2 applications per week; stop 2 weeks before the end of flowering | |
| Spray directly onto leaves and flowers | |
| Foliar application |
How the Leaf·Coat film forms and how long it lasts
After application, an elastic film approximately 1.5 micrometres thick forms on the leaf within a few hours. It remains active for up to two weeks and breaks down naturally when exposed to light.
Its uniform application to leaves and flowers, in a ready-to-use form, distinguishes Leaf·Coat from a foliar fertiliser that requires dilution.
Directions for use
The liquid must not be diluted: apply it straight from the bottle, preferably using a sprayer, approximately twice a week up to two weeks before the end of the flowering period.
Apply it separately from nutrient-enriched watering. For product format and application method, please refer to the packaging you have purchased.
Technical data sheet
Recommended products
- Alg·A·Mic — A revitalising treatment derived from cold-pressed seaweed.
- Root·Juice — Supports the early stages of the programme with a formulation combining humic acids and seaweed.
How it works and when to use it
Leaf•Coat is ready to use and does not need diluting: apply directly from the bottle, preferably using a spray bottle, thoroughly covering leaves and flowers approximately twice a week until two weeks before the end of flowering. After a few hours, a thin, elastic layer, approximately 1.5 microns thick, forms on the leaf; this remains active for up to two weeks before breaking down in the light.
At temperatures above 28 °C and in high humidity, the film reduces water loss through evaporation; in winter, it helps to maintain the temperature of the leaves. The product is not absorbed by the plant and therefore does not alter the flavour of the fruit. It is recommended for the prevention of insects and leaf fungi as an alternative to synthetic pesticides.
Biobizz: growing in harmony with nature
Biobizz’s story began in 1992 in Groningen, the Netherlands, as a small family business with a clear vision: to put organic cultivation at the heart of everything. Since then, the range has expanded to include fertilisers, growing media and plant stimulators designed to support the different stages of plant growth. Close to its headquarters, the Little Netherlands experimental greenhouse provides the company with a space in which to observe crops and refine its formulations. This philosophy appeals to those who wish to build their own growing programme based on the soil and natural methods.
In 2020, Biobizz announced a two-year technical collaboration with NEIKER, the Basque Institute for Agricultural Research. The project included comparative studies on fertilisers and performance tests in various growing media: a concrete example of the brand’s focus on research applied to organic farming.
Leaf·Coat is a ready-to-use, natural latex-based foliar spray that strengthens the plant and protects it from certain insects and leaf fungi. It forms a permeable, biodegradable barrier on the leaf, which allows air and light to pass through, and is designed for high temperatures – above 28 °C – and for the colder months. It is not absorbed by the leaf and does not alter the flavour of the fruit; it is available in sizes ranging from 500 ml to 10 L.
What is BioBizz Leaf·Coat used for?
Leaf·Coat is a ready-to-use leaf protectant based on natural latex. It is sprayed directly onto the leaves and forms a thin, permeable film that allows air and light to pass through.
The protection is external: the product is not absorbed by the plant and is not a fertiliser to be applied to the roots.
It is recommended for reducing water loss through evaporation and for preventing leaf pests and fungal diseases, as an alternative to synthetic pesticides.
Key features
Ready-to-use foliar protectant: no dilution required. Forms an elastic film of approximately 1.5 microns on the leaves.
Biobizz recommends approximately two applications per week. Stop treatment two weeks before the end of flowering.
Technical data sheet
| Ready-to-use foliar protectant | |
| Do not dilute | |
| Approximately 2 applications per week; stop 2 weeks before the end of flowering | |
| Spray directly onto leaves and flowers | |
| Foliar application |
How the Leaf·Coat film forms and how long it lasts
After application, an elastic film approximately 1.5 micrometres thick forms on the leaf within a few hours. It remains active for up to two weeks and breaks down naturally when exposed to light.
Its uniform application to leaves and flowers, in a ready-to-use form, distinguishes Leaf·Coat from a foliar fertiliser that requires dilution.
Directions for use
The liquid must not be diluted: apply it straight from the bottle, preferably using a sprayer, approximately twice a week up to two weeks before the end of the flowering period.
Apply it separately from nutrient-enriched watering. For product format and application method, please refer to the packaging you have purchased.
Technical data sheet
Recommended products
- Alg·A·Mic — A revitalising treatment derived from cold-pressed seaweed.
- Root·Juice — Supports the early stages of the programme with a formulation combining humic acids and seaweed.
How it works and when to use it
Leaf•Coat is ready to use and does not need diluting: apply directly from the bottle, preferably using a spray bottle, thoroughly covering leaves and flowers approximately twice a week until two weeks before the end of flowering. After a few hours, a thin, elastic layer, approximately 1.5 microns thick, forms on the leaf; this remains active for up to two weeks before breaking down in the light.
At temperatures above 28 °C and in high humidity, the film reduces water loss through evaporation; in winter, it helps to maintain the temperature of the leaves. The product is not absorbed by the plant and therefore does not alter the flavour of the fruit. It is recommended for the prevention of insects and leaf fungi as an alternative to synthetic pesticides.
Biobizz: growing in harmony with nature
Biobizz’s story began in 1992 in Groningen, the Netherlands, as a small family business with a clear vision: to put organic cultivation at the heart of everything. Since then, the range has expanded to include fertilisers, growing media and growth stimulators designed to support the different stages of plant growth. Close to its headquarters, the Little Netherlands experimental greenhouse provides the company with a space in which to observe crops and refine its formulations. This philosophy appeals to those who wish to build their own growing programme based on the soil and natural methods.
In 2020, Biobizz announced a two-year technical collaboration with NEIKER, the Basque Institute for Agricultural Research. The project included comparative studies on fertilisers and performance tests in various growing media: a concrete example of the brand’s focus on research applied to organic farming.
Leaf·Coat is a ready-to-use, natural latex-based foliar spray that strengthens the plant and protects it from certain insects and leaf fungi. It forms a permeable, biodegradable barrier on the leaf, which allows air and light to pass through, and is designed for high temperatures – above 28 °C – and for the colder months. It is not absorbed by the leaf and does not alter the flavour of the fruit; it is available in sizes ranging from 500 ml to 10 L.
What is BioBizz Leaf·Coat used for?
Leaf·Coat is a ready-to-use leaf protectant based on natural latex. It is sprayed directly onto the leaves and forms a thin, permeable film that allows air and light to pass through.
The protection is external: the product is not absorbed by the plant and is not a fertiliser to be applied to the roots.
It is recommended for reducing water loss through evaporation and for preventing leaf pests and fungal diseases, as an alternative to synthetic pesticides.
Key features
Ready-to-use foliar protectant: no dilution required. Forms an elastic film of approximately 1.5 microns on the leaves.
Biobizz recommends approximately two applications per week. Stop treatment two weeks before the end of flowering.
Technical data sheet
| Ready-to-use foliar protectant | |
| Do not dilute | |
| Approximately 2 applications per week; stop 2 weeks before the end of flowering | |
| Spray directly onto leaves and flowers | |
| Foliar application |
How the Leaf·Coat film forms and how long it lasts
After application, an elastic film approximately 1.5 micrometres thick forms on the leaf within a few hours. It remains active for up to two weeks and breaks down naturally when exposed to light.
Its uniform application to leaves and flowers, in a ready-to-use form, distinguishes Leaf·Coat from a foliar fertiliser that requires dilution.
Directions for use
The liquid must not be diluted: apply it straight from the bottle, preferably using a sprayer, approximately twice a week up to two weeks before the end of the flowering period.
Apply it separately from nutrient-enriched watering. For product format and application method, please refer to the packaging you have purchased.
Technical data sheet
Recommended products
- Alg·A·Mic — A revitalising treatment derived from cold-pressed seaweed.
- Root·Juice — Supports the early stages of the programme with a formulation combining humic acids and seaweed.
How it works and when to use it
Leaf•Coat is ready to use and does not need diluting: apply directly from the bottle, preferably using a spray bottle, thoroughly covering leaves and flowers approximately twice a week until two weeks before the end of flowering. After a few hours, a thin, elastic layer, approximately 1.5 microns thick, forms on the leaf; this remains active for up to two weeks before breaking down when exposed to light.
At temperatures above 28 °C and in high humidity, the film reduces water loss through evaporation; in winter, it helps to maintain the temperature of the leaves. The product is not absorbed by the plant and therefore does not alter the flavour of the fruit. It is recommended for the prevention of insects and leaf fungi as an alternative to synthetic pesticides.
Biobizz: growing in harmony with nature
Biobizz’s story began in 1992 in Groningen, the Netherlands, as a small family business with a clear vision: to put organic cultivation at the heart of everything. Since then, the range has expanded to include fertilisers, growing media and plant stimulators designed to support the different stages of plant growth. Close to its headquarters, the Little Netherlands experimental greenhouse provides the company with a space in which to observe crops and refine its formulations. This philosophy appeals to those who wish to build their own growing programme based on the soil and natural methods.
In 2020, Biobizz announced a two-year technical collaboration with NEIKER, the Basque Institute for Agricultural Research. The project included comparative studies on fertilisers and performance tests in various growing media: a concrete example of the brand’s focus on research applied to organic farming.
Recalculation in progress …