The 2 L/H Pressure-Compensating Dripper is designed to ensure maximum precision and uniformity in the localised irrigation of pots, greenhouses, nurseries and hydroponic systems. The...
The 2 L/H Pressure-Compensating Dripper is designed to ensure maximum precision and uniformity in the localised irrigation of pots, greenhouses, nurseries and hydroponic systems. The pressure-compensated (PC) technology effectively addresses variations in flow rate caused by differences in ground level or very long irrigation lines: every single plant will receive exactly the same amount of water, from the first to the last in the circuit. Its self-cleaning design and high-strength materials make it an essential component for automated, high-efficiency systems.
Key features
Constant flow rate: precise and controlled delivery of 2 litres per hour for balanced irrigation without wastage.
Pressure-Compensating (PC) Technology: maintains a stable water flow even in the event of pressure fluctuations in the system.
Self-cleaning system: the internal turbulent-flow labyrinth minimises the risk of blockages caused by limescale or sediment.
High-strength materials: made from high-quality technopolymers and polycarbonate, resistant to UV rays and the effects of hydroponic fertilisers.
Multifunction outlet: suitable for direct connection to PE manifold pipes (3 mm hole) or for connection to capillary microtubes (4–6 mm).
Technical specifications
Type: Self-regulating button-type dripper (PC)
Nominal flow rate: 2 litres per hour (2 L/h)
Recommended operating pressure: 0.5–4.0 bar
Identification colour: Blue
Material: Polycarbonate and UV-resistant engineering polymers
Inlet connection: Push-fit for 3 mm hole in PE pipe
Output compatibility: 4–6 mm capillary microtube or direct dispensing
Areas of application: Pots, greenhouses, nurseries, hydroponic cultivation and gardening
Instructions for use and tips
Pierce the main PE pipe with a 3 mm hole punch before firmly inserting the dripper.
When using a microtube, connect the branch line to the dripper outlet and position a stake near the plant.
Flush the water pipes periodically to remove any salt build-up before fertilising.