Available
DIMLUX – CO₂ SENSOR + GAS PROTECT FOR THE DIMLUX MAXI CONTROLLER
Cod. 1310
Brand: DIMLUX
The Dimlux Gas Protect CO₂ sensor works with the Maxi Controller to switch carbon dioxide-generating equipment on and off based on the CO₂ concentrations in your grow room. Unlike the Dimlux...
Standard price
€ 731,27
Discount 50 %
Offer price
€365,63 VAT included(22%)
until the31/12/2026
The Dimlux Gas Protect CO₂ sensor works with the Maxi Controller to switch carbon dioxide-generating equipment on and off based on the CO₂ concentrations in your grow room. Unlike the Dimlux CO₂ sensor for the Maxi Controller, it also features sensors for methane (CH₄) and carbon monoxide (CO), which trigger an alarm and cut off the CO₂ supply if the levels of these two gases become dangerous, a feature particularly useful for those operating gas-burner-based CO₂ generators. This unit offers excellent peace of mind, allowing you to relax in the knowledge that your grow room is free from toxic gases; a safer environment for both you and your plants.
Key features of the Dimlux Gas Protect CO₂ sensor:
- Switches CO₂-generating equipment on and off based on the PPM (parts per million) levels in the air
- Capable of increasing yields by up to 20 per cent
- Powers the CO₂ dosing system
- Monitors methane and carbon monoxide levels in the air
- Shuts down CO2-generating equipment if toxic gas levels become too high
- Protects people and plants from the effects of toxic gases
- Allows you to leave your grow room with greater peace of mind
How the Dimlux Gas Protect CO₂ Sensor works:
CO₂ supplementation is one of the most effective ways to boost growth and increase the productivity of your indoor grow. If you’re using a closed-loop system, CO₂ supplementation is essential. The problem is that, like most things in life, too much of a good thing can be a bad thing: high concentrations of CO₂ can actually damage plants.
The Dimlux team has found a way to regulate CO₂ production based on the exact levels of CO₂ in the air, measured in parts per million (ppm). This new CO₂ sensor goes one step further by also detecting levels of toxic gases (carbon monoxide and methane). This is particularly useful for those using CO₂ generators that operate by burning propane or natural gas, which can potentially produce unwanted gases as by-products. If levels begin to rise, CO₂ delivery will be suspended until the user restores it, providing an additional layer of safety and, in turn, peace of mind for the grower.
The Dimlux team has found a way to regulate CO₂ production based on the exact levels of CO₂ in the air, measured in parts per million (ppm). This new CO₂ sensor goes one step further by also detecting levels of toxic gases (carbon monoxide and methane). This is particularly useful for those using CO₂ generators that operate by burning propane or natural gas, which can potentially produce unwanted gases as by-products. If levels begin to rise, CO₂ delivery will be suspended until the user restores it, providing an additional layer of safety and, in turn, peace of mind for the grower.
How to use the Dimlux Gas Protect CO₂ Sensor:
The system is plug-and-play: simply connect the supplied cable from the ‘power in’ socket on the front left-hand side of the unit to a wall socket. The ‘power out’ socket on the front right-hand side of the unit connects to an adapter with a two-pin plug. You can then plug the gas generator / CO₂ generator into the adapter. The power supply will be activated whenever CO₂ is required to maintain optimal levels. Simply connect the unit to the Maxi Controller using the cable marked ‘CO₂ Output’. You can then programme the ideal CO₂ level using the Maxi Controller.
There are a number of products that will help you improve the performance of your Dimlux Maxi Controller and Dimlux reflectors and ballasts, including:
The Dimlux Maxi Controller CO₂ sensor provides accurate information on the carbon dioxide content in the grow room and can be used to control a CO₂ regulator
The Dimlux Maxi Controller CO₂ sensor provides accurate information on the carbon dioxide content in the grow room and can be used to control a CO₂ regulator
Infrared thermal imaging camera with a 5m cable: measures the surface temperature of the leaves to obtain the most accurate and appropriate responses from the OptiClimate system and Dimlux ballasts
Temperature probe with a 5m cable: ensures that when temperatures exceed the desired settings, the Dimlux reflectors dim or switch off
Humidity sensor with a 5m cable – allows the OptiClimate system to take the humidity level in the grow room into account when regulating environmental conditions
Fan/Aux Box for the Dimlux Maxi Controller – allows you to control a heater, a humidifier, a dehumidifier and an extractor fan
Fan/Aux Box for the Dimlux Maxi Controller – allows you to control a heater, a humidifier, a dehumidifier and an extractor fan
-
1
On sale
€623,30
€ 311,65 VAT included(22%)
Recalculation in progress …

