CANNA - HYDRO VEGA A+B
CANNA Hydro Vega A+B is a professional two-part nutrient for the growth stage, developed for inert growing media using a run-to-waste system. The formula contains easily absorbable nitrogen compounds, EDDHA-chelated iron and trace elements, and is suitable for all types of inert growing media. It is used in conjunction with Hydro Flores A+B during the flowering stage.
What is CANNA Hydro Vega A+B used for?
Hydro Vega A+B is a two-part nutrient for the vegetative stage of hydroponic systems using a run-to-waste system. It supports growth on inert media prior to flowering.
The formula includes readily available nitrogen compounds, EDDHA chelated iron and trace elements.
In the HYDRO system, the solution is prepared, delivered to the roots and does not recirculate: for recirculating systems, the AQUA range is available, which operates differently.
Technical data sheet
| Hydro two-phase nutrient for growth | |
| 400 ml of A and 400 ml of B per 100 L (4 ml/L each; 1:250); pH 5.2–6.2 | |
| Growth | |
| Dilute A and then B; check drainage | |
| Hydroponics |
Formulation and product selection
Vega supports plant growth and Flores supports the flowering stage. The transition follows the plant’s development, not a fixed timeframe.
The two components must be kept separate until dilution and added in order: one does not replace the other.
Directions for use
For the recommended dose, prepare 100 L of water with 400 ml of A and 400 ml of B, equivalent to 4 ml/L per component. Add A first, mix, then incorporate B.
The target pH is between 5.2 and 6.2. The volume applied and frequency of watering depend on the growing medium and drainage conditions. When the plant enters the flowering stage, switch to Hydro Flores.
Related products
- CANNA Hydro Flores A+B — This is the two-part base fertiliser for the flowering stage in hydroponic systems.
- CANNAZYM — An enzyme complex for the growing medium.
CANNA: research and programmes for every growing medium
Since the early 1990s, CANNA has been developing fertilisers and growing media for growers using soil, coconut fibre or hydroponics. Its approach stems from a practical question: what changes when the growing medium changes? This has led to the creation of distinct product ranges, comprising basic nutrients and complementary products designed to be used in sequence. Research, trials and consultation with growers are integral to the company’s history, which aims to make choosing the right programme – from the first nutrient to the additives – as straightforward as possible.
CANNA states that it carries out research, laboratory testing and formulation development in-house. According to its presentation, the development of a new product takes on average around two years: a process that involves the design of specific ranges for different growing media and cultivation systems.
CANNA Grow Schedule: Hydro
Download the original fact sheet
| Stage | Weeks | Hours of light | Hydro Vega A/B | Hydro Flores A/B | Rhizotonic | Cannazym | Cannaboost | PK 13/14 | EC+ (mS/cm) | Total EC (mS/cm) |
|---|---|---|---|---|---|---|---|---|---|---|
| Growth | ||||||||||
| Start / rooting (3–5 days) | <1 | 18 | 10–20 | – | 40 | – | – | – | 0.7–1.1 | 1.1–1.5 |
| Vegetative phase I | 0–3 | 18 | 15–25 | – | 20 | 25 | – | – | 0.9–1.3 | 1.3–1.7 |
| Vegetative phase II | 2–4 | 12 | 20–30 | – | 20 | 25 | 20 | – | 1.2–1.6 | 1.6–2.0 |
| Flowering | ||||||||||
| Generative period I | 2–3 | 12 | – | 25–35 | 5 | 25 | 20–40 | – | 1.4–1.8 | 1.8–2.2 |
| Generative period II | 1 | 12 | – | 25–35 | 5 | 25 | 20–40 | 15 | 1.5–1.9 | 1.9–2.3 |
| Generative period III | 2–3 | 12 | – | 15–25 | 5 | 25 | 20–40 | – | 1.0–1.4 | 1.4–1.8 |
| Generative period IV | 1–2 | 10–12 | – | – | – | 25–50 | 20–40 | – | 0.0 | 0.4 |
Dosage in ml per 10 litres of water. Add the EC of tap water to the recommended EC. Recommended pH as per the original data sheet.
CANNA Hydro Vega A+B is a professional two-part nutrient for the growth stage, developed for inert growing media using a run-to-waste system. The formula contains easily absorbable nitrogen compounds, EDDHA-chelated iron and trace elements, and is suitable for all types of inert growing media. It is used in conjunction with Hydro Flores A+B during the flowering stage.
What is CANNA Hydro Vega A+B used for?
Hydro Vega A+B is a two-part nutrient for the vegetative stage of hydroponic systems using a run-to-waste system. It supports growth on inert media prior to flowering.
The formula includes readily available nitrogen compounds, EDDHA chelated iron and trace elements.
In the HYDRO system, the solution is prepared, delivered to the roots and does not recirculate: for recirculating systems, the AQUA range is available, which operates differently.
Technical data sheet
| Hydro two-phase nutrient for growth | |
| 400 ml of A and 400 ml of B per 100 L (4 ml/L each; 1:250); pH 5.2–6.2 | |
| Growth | |
| Dilute A and then B; check drainage | |
| Hydroponics |
Formulation and product selection
Vega supports plant growth and Flores supports the flowering stage. The transition follows the plant’s development, not a fixed timeframe.
The two components must be kept separate until dilution and added in order: one does not replace the other.
Directions for use
For the recommended dose, prepare 100 L of water with 400 ml of A and 400 ml of B, equivalent to 4 ml/L per component. Add A first, mix, then incorporate B.
The target pH is between 5.2 and 6.2. The volume applied and frequency of watering depend on the growing medium and drainage conditions. When the plant enters the flowering stage, switch to Hydro Flores.
Related products
- CANNA Hydro Flores A+B — This is the two-part base fertiliser for the flowering stage in hydroponic systems.
- CANNAZYM — An enzyme complex for the growing medium.
CANNA: research and programmes for every growing medium
Since the early 1990s, CANNA has been developing fertilisers and growing media for growers using soil, coconut fibre or hydroponics. Its approach stems from a practical question: what changes when the growing medium changes? This has led to the creation of distinct product ranges, comprising basic nutrients and complementary products designed to be used in sequence. Research, trials and consultation with growers are integral to the company’s history, which aims to make choosing the right programme – from the first nutrient to the additives – as straightforward as possible.
CANNA states that it carries out research, laboratory testing and formulation development in-house. According to its presentation, the development of a new product takes on average around two years: a process that involves the design of specific ranges for different growing media and cultivation systems.
CANNA Grow Schedule: Hydro
Download the original fact sheet
| Stage | Weeks | Hours of light | Hydro Vega A/B | Hydro Flores A/B | Rhizotonic | Cannazym | Cannaboost | PK 13/14 | EC+ (mS/cm) | Total EC (mS/cm) |
|---|---|---|---|---|---|---|---|---|---|---|
| Growth | ||||||||||
| Start / rooting (3–5 days) | <1 | 18 | 10–20 | – | 40 | – | – | – | 0.7–1.1 | 1.1–1.5 |
| Vegetative phase I | 0–3 | 18 | 15–25 | – | 20 | 25 | – | – | 0.9–1.3 | 1.3–1.7 |
| Vegetative phase II | 2–4 | 12 | 20–30 | – | 20 | 25 | 20 | – | 1.2–1.6 | 1.6–2.0 |
| Flowering | ||||||||||
| Generative period I | 2–3 | 12 | – | 25–35 | 5 | 25 | 20–40 | – | 1.4–1.8 | 1.8–2.2 |
| Generative period II | 1 | 12 | – | 25–35 | 5 | 25 | 20–40 | 15 | 1.5–1.9 | 1.9–2.3 |
| Generative period III | 2–3 | 12 | – | 15–25 | 5 | 25 | 20–40 | – | 1.0–1.4 | 1.4–1.8 |
| Generative period IV | 1–2 | 10–12 | – | – | – | 25–50 | 20–40 | – | 0.0 | 0.4 |
Dosage in ml per 10 litres of water. Add the EC of tap water to the recommended EC. Recommended pH as per the original data sheet.
CANNA Hydro Vega A+B for hard water is the basic nutrient for growth in hydroponic systems, in the variant designed for water with a higher mineral content. The formulation supports the vegetative stage prior to switching to the Hydro Flores nutrient.
What is CANNA Hydro Vega A+B for hard water used for?
Hydro Vega A+B for hard water is the basic nutrient for growth in hydroponic systems; as the name suggests, this variant is designed for water with a higher mineral content.
It contains nitrogen compounds, EDDHA-chelated iron and trace elements to support vegetative growth prior to flowering.
The HYDRO system is designed for inert growing media with a flush-and-drain system and differs from the AQUA range, which is designed for recirculating systems.
Technical data sheet
| Hydro two-phase growth nutrient, for hard water | |
| 24–31 ml of A and 24–31 ml of B per 10 L, according to the phase indicated in the CANNA Hydro HW calendar; pH 5.2–6.2 | |
| Growth | |
| Dilute A and then B; check drainage | |
| Hydroponics; variant for hard water |
Formulation and product selection
The A+B combination is complementary in the selected phase: one component does not replace the other and must not be combined with a bottle from another product range.
Checking the complete solution and the preparation sequence remain important every week.
Instructions for use
Prepare 10 L of water with 24–31 ml of A and 24–31 ml of B, according to the stage indicated on the CANNA Hydro HW calendar. Add A first, mix, and then stir in B.
The recommended pH is between 5.2 and 6.2. When transitioning to the flowering stage, continue with the corresponding version of Hydro Flores, choosing the variant based on the characteristics of your water source.
Related products
- CANNA Hydro Flores A+B for hard water — A two-part mineral fertiliser for the flowering stage in hydroponic systems.
- CANNAZYM — An enzyme complex for the growing medium.
CANNA: research and programmes for every growing medium
Since the early 1990s, CANNA has been developing fertilisers and growing media for growers using soil, coconut fibre or hydroponics. Its approach stems from a practical question: what changes when the growing medium changes? This has led to the creation of distinct product ranges, comprising basic nutrients and complementary products designed to be used in sequence. Research, trials and consultation with growers are integral to the company’s history, which aims to make choosing the right programme – from the first nutrient to the additives – as straightforward as possible.
CANNA states that it carries out research, laboratory testing and formulation development in-house. According to its presentation, the development of a new product takes on average around two years: a process that involves the design of specific product ranges for different growing media and cultivation systems.
Recalculation in progress …