CANNA - AQUA VEGA A+B | 2x1L
CANNA Aqua Vega A+B is a two-part base nutrient for the vegetative stage in recirculating hydroponic systems. The formulation is designed to dissolve in water and provide the elements necessary for...
CANNA Aqua Vega A+B is a two-part base nutrient for the vegetative stage in recirculating hydroponic systems. The formulation is designed to dissolve in water and provide the elements necessary for growth prior to the transition to the flowering stage.
What is CANNA Aqua Vega A+B used for?
Aqua Vega A+B is a two-part nutrient for the vegetative stage in recirculating hydroponic systems. It is used to support growth before the transition to the flowering stage.
The formula contains easily absorbable nitrogen compounds, EDDHA-chelated iron and trace elements, with a balance specifically designed to promote shoot and root development.
The two parts must be added to the water in sequence: if they come into contact whilst in concentrated form, the elements may form compounds that are poorly available to the plant.
Technical data sheet
| Two-phase mineral fertiliser for growth | |
| 20 ml of A and 20 ml of B per 10 L (2 ml/L each; 1:500) | |
| Growth and the first few weeks of flowering | |
| Dilute A, mix, then add B; pH 5.2–6.2 | |
| Recirculating hydroponics |
Formulation and product selection
Aqua Vega supports plant growth; Aqua Flores takes over during flowering. The change of product follows the growth stage, not a fixed schedule.
In recirculating systems, the solution is reused: the choice of nutrient must be made in conjunction with tank management.
Effects on the plant and flowers
Aqua Vega promotes a robust plant with vigorous growth and abundant root development. The readily available nitrogen, EDDHA iron and trace elements lay the foundation for subsequent flowering.
It should be used during the growth stage and in the first 1–3 weeks of flowering. Switch to Aqua Flores when flowering begins, or earlier if the pH of the circulating solution falls below 5.0–5.2.
Directions for use
To prepare the recommended dilution, add 20 ml of Part A per 10 L of water, mix, and then add 20 ml of Part B. Mix again before using the solution.
The target pH is between 5.2 and 6.2. When switching to the flowering stage, continue the programme with Aqua Flores, whilst monitoring the initial water quality and plant conditions.
Related products
- CANNA Aqua Flores A+B — A two-part mineral fertiliser for the flowering stage in recirculating hydroponic systems.
- CANNA Aqua Clay Pebbles — A mineral substrate consisting of expanded clay granules, designed for hydroponic systems.
CANNA: research and programmes for every growing medium
Since the early 1990s, CANNA has been developing fertilisers and growing media for growers using soil, coconut fibre or hydroponics. Its approach begins with a practical question: what changes when the growing medium changes? This has led to the creation of distinct product ranges, comprising base nutrients and complementary products designed to be used in sequence. Research, testing and consultation with growers are integral to the company’s history, which aims to make the choice of programme – from the first nutrient to the additives – clearer.
CANNA states that it carries out research, laboratory testing and formulation development in-house. According to its presentation, the development of a new product takes on average around two years: a process that involves the design of specific ranges for different growing media and cultivation systems.
CANNA Grow Schedule: Aqua
Download the original fact sheet
| Stage | Weeks | Hours of light | Aqua Vega A+B | Aqua Flores A+B | Rhizotonic | Cannazym | Cannaboost | PK 13/14 | EC+ (mS/cm) | Total EC (mS/cm) |
|---|---|---|---|---|---|---|---|---|---|---|
| Growth | ||||||||||
| Start / rooting (3–5 days) | <1 | 18 | 15–25 | – | 40 | – | – | – | 0.7–1.1 | 1.1–1.5 |
| Vegetative phase I | 0–3 | 18 | 20–30 | – | 20 | 25 | – | – | 0.9–1.3 | 1.3–1.7 |
| Vegetative phase II | 2–4 | 12 | 25–35 | – | 20 | 25 | 20 | – | 1.2–1.6 | 1.6–2.0 |
| Flowering | ||||||||||
| Generative period I | 2–3 | 12 | – | 30–40 | 5 | 25 | 20–40 | – | 1.4–1.8 | 1.8–2.2 |
| Generative period II | 1 | 12 | – | 30–40 | 5 | 25 | 20–40 | 15 | 1.6–2.0 | 2.0–2.4 |
| Generative period III | 2–3 | 12 | – | 20–30 | 5 | 25 | 20–40 | – | 1.0–1.4 | 1.4–1.8 |
| Generative period IV | 1–2 | 10–12 | – | – | – | 25–50 | 20–40 | – | 0.0 | 0.4 |
Dosage in ml per 10 litres of water. Add the EC of tap water to the recommended EC. Recommended pH as per the original data sheet.
-
17x8x26 cm (WxLxH)
-
2,44 kg
-
1
-
8713508542213
Recalculation in progress …