CANNA - AQUA FLORES A+B
CANNA Aqua Flores A+B is a two-part mineral fertiliser for the flowering stage in recirculating hydroponic systems. Parts A and B provide a complete nutrient solution, formulated to be dissolved separately in water and then combined in the reservoir.
What is CANNA Aqua Flores A+B used for?
Aqua Flores A+B is a two-part mineral fertiliser for the flowering stage in recirculating hydroponic systems, such as NFT and ebb and flow. Parts A and B are dissolved separately in water and combined in the reservoir.
The formula provides phosphorus, potassium and chelated trace elements, designed for the flowering stage. It also contains pH stabilisers, silicon, and humic and fulvic acids.
The two parts remain separate in the packaging because, in their concentrated form, they could react with each other: they must be kept separate until diluted.
Technical data sheet
| Two-phase mineral fertiliser for flowering | |
| 30 ml of A and 30 ml of B per 10 L (3 ml/L each; 1:333) | |
| From the onset of flower formation; regular replacement of the solution | |
| Dilute A first, then B; pH 5.2–6.2 | |
| Recirculating hydroponics; hard or soft water depending on the variant |
Formulation and product selection
Aqua Flores is used during the flowering stage, when the ratio of nutrients required by the plant changes. During the vegetative stage, Aqua Vega is the product of choice, as it supports growth.
In a recirculating system, the solution returns to the tank and is reused: the composition of the water and the frequency of tank changes are just as important as the dosage.
The AQUA system is specifically designed for recirculation and should not be confused with solutions intended for one-way drainage.
Effects on the plant and flowers
During flowering, the plant requires less nitrogen and more potassium and phosphorus. Aqua Flores provides these elements alongside chelated micro-nutrients to promote fruit development and abundant flowering. The formula also contains silicon and humic and fulvic acids.
The switch to Aqua Flores should be made when the flowers begin to form, for a period of 1–3 weeks with 12 hours of light. Although the formula contains pH stabilisers, the pH level should be checked after preparation.
Directions for use
Shake the bottles and fill the reservoir with water. Add 30 ml of Part A per 10 L, mix, then add 30 ml of Part B to the same 10 L.
The target pH is between 5.2 and 6.2. Check the solution after preparation and adhere to the tank refresh schedule.
As recirculation returns water and nutrients to the system, pH and EC checks must be carried out regularly, not just at the time of preparation.
Related products
- CANNA Aqua Clay Pebbles — A mineral substrate made from expanded clay granules, designed for hydroponic systems.
- CANNA Boost Accelerator — Supports flower development and the plant’s metabolism during the flowering stage.
CANNA: research and programmes for every growing medium
Since the early 1990s, CANNA has been developing fertilisers and growing media for growers using soil, coconut fibre or hydroponics. Its approach stems from a practical question: what changes when the growing medium changes? This has led to the creation of distinct product ranges, comprising basic nutrients and complementary products designed to be used in sequence. Research, testing and consultation with growers are integral to the company’s history, which aims to make the choice of programme – from the first nutrient to the additives – as straightforward as possible.
CANNA states that it carries out research, laboratory testing and formulation development in-house. According to its presentation, the development of a new product takes on average around two years: a process that involves the design of specific ranges for different growing media and cultivation systems.
CANNA Grow Schedule: Aqua
Download the original fact sheet
| Stage | Weeks | Hours of light | Aqua Vega A+B | Aqua Flores A+B | Rhizotonic | Cannazym | Cannaboost | PK 13/14 | EC+ (mS/cm) | Total EC (mS/cm) |
|---|---|---|---|---|---|---|---|---|---|---|
| Growth | ||||||||||
| Start / rooting (3–5 days) | <1 | 18 | 15–25 | – | 40 | – | – | – | 0.7–1.1 | 1.1–1.5 |
| Vegetative phase I | 0–3 | 18 | 20–30 | – | 20 | 25 | – | – | 0.9–1.3 | 1.3–1.7 |
| Vegetative phase II | 2–4 | 12 | 25–35 | – | 20 | 25 | 20 | – | 1.2–1.6 | 1.6–2.0 |
| Flowering | ||||||||||
| Generative period I | 2–3 | 12 | – | 30–40 | 5 | 25 | 20–40 | – | 1.4–1.8 | 1.8–2.2 |
| Generative period II | 1 | 12 | – | 30–40 | 5 | 25 | 20–40 | 15 | 1.6–2.0 | 2.0–2.4 |
| Generative period III | 2–3 | 12 | – | 20–30 | 5 | 25 | 20–40 | – | 1.0–1.4 | 1.4–1.8 |
| Generative period IV | 1–2 | 10–12 | – | – | – | 25–50 | 20–40 | – | 0.0 | 0.4 |
Dosage in ml per 10 litres of water. Add the EC of tap water to the recommended EC. Recommended pH as per the original data sheet.
CANNA Aqua Flores A+B is a two-part mineral fertiliser for the flowering stage in recirculating hydroponic systems. Parts A and B provide a complete nutrient solution, formulated to be dissolved separately in water and then combined in the reservoir.
What is CANNA Aqua Flores A+B used for?
Aqua Flores A+B is a two-part mineral fertiliser for the flowering stage in recirculating hydroponic systems, such as NFT and ebb and flow. Parts A and B are dissolved separately in water and combined in the reservoir.
The formula provides phosphorus, potassium and chelated trace elements, designed for the flowering stage. It also contains pH stabilisers, silicon, and humic and fulvic acids.
The two parts remain separate in the packaging because, in their concentrated form, they could react with each other: they must be kept separate until diluted.
Technical data sheet
| Two-phase mineral fertiliser for flowering | |
| 30 ml of A and 30 ml of B per 10 L (3 ml/L each; 1:333) | |
| From the onset of flower formation; regular replacement of the solution | |
| Dilute A first, then B; pH 5.2–6.2 | |
| Recirculating hydroponics; hard or soft water depending on the variant |
Formulation and product selection
Aqua Flores is used during the flowering stage, when the ratio of nutrients required by the plant changes. During the vegetative stage, Aqua Vega is the product of choice, as it supports growth.
In a recirculating system, the solution returns to the tank and is reused: the composition of the water and the frequency of tank changes are just as important as the dosage.
The AQUA system is specifically designed for recirculation and should not be confused with solutions intended for drain-and-run systems.
Effects on the plant and flowers
During flowering, the plant requires less nitrogen and more potassium and phosphorus. Aqua Flores provides these elements alongside chelated micro-nutrients to promote fruit development and abundant flowering. The formula also contains silicon and humic and fulvic acids.
The switch to Aqua Flores should be made when the flowers begin to form, for a period of 1–3 weeks with 12 hours of light. Although the formula contains pH stabilisers, the pH level should be checked after preparation.
Directions for use
Shake the bottles and fill the reservoir with water. Add 30 ml of Part A per 10 L, mix, then add 30 ml of Part B to the same 10 L.
The target pH is between 5.2 and 6.2. Check the solution after preparation and adhere to the tank refresh schedule.
As recirculation returns water and nutrients to the system, pH and EC checks must be carried out regularly, not just at the time of preparation.
Related products
- CANNA Aqua Clay Pebbles — A mineral substrate made from expanded clay granules, designed for hydroponic systems.
- CANNA Boost Accelerator — Supports flower development and the plant’s metabolism during the flowering stage.
CANNA: research and programmes for every growing medium
Since the early 1990s, CANNA has been developing fertilisers and growing media for growers using soil, coconut fibre or hydroponics. Its approach stems from a practical question: what changes when the growing medium changes? This has led to the creation of distinct product ranges, comprising basic nutrients and complementary products designed to be used in sequence. Research, testing and consultation with growers are integral to the company’s history, which aims to make the choice of programme – from the first nutrient to the additives – as straightforward as possible.
CANNA states that it carries out research, laboratory testing and formulation development in-house. According to its presentation, the development of a new product takes on average around two years: a process that involves the design of specific ranges for different growing media and cultivation systems.
CANNA Grow Schedule: Aqua
Download the original fact sheet
| Stage | Weeks | Hours of light | Aqua Vega A+B | Aqua Flores A+B | Rhizotonic | Cannazym | Cannaboost | PK 13/14 | EC+ (mS/cm) | Total EC (mS/cm) |
|---|---|---|---|---|---|---|---|---|---|---|
| Growth | ||||||||||
| Start / rooting (3–5 days) | <1 | 18 | 15–25 | – | 40 | – | – | – | 0.7–1.1 | 1.1–1.5 |
| Vegetative phase I | 0–3 | 18 | 20–30 | – | 20 | 25 | – | – | 0.9–1.3 | 1.3–1.7 |
| Vegetative phase II | 2–4 | 12 | 25–35 | – | 20 | 25 | 20 | – | 1.2–1.6 | 1.6–2.0 |
| Flowering | ||||||||||
| Generative period I | 2–3 | 12 | – | 30–40 | 5 | 25 | 20–40 | – | 1.4–1.8 | 1.8–2.2 |
| Generative period II | 1 | 12 | – | 30–40 | 5 | 25 | 20–40 | 15 | 1.6–2.0 | 2.0–2.4 |
| Generative period III | 2–3 | 12 | – | 20–30 | 5 | 25 | 20–40 | – | 1.0–1.4 | 1.4–1.8 |
| Generative period IV | 1–2 | 10–12 | – | – | – | 25–50 | 20–40 | – | 0.0 | 0.4 |
Dosage in ml per 10 litres of water. Add the EC of tap water to the recommended EC. Recommended pH as per the original data sheet.
CANNA Aqua Flores A+B is a two-part mineral fertiliser for the flowering stage in recirculating hydroponic systems. Parts A and B provide a complete nutrient solution, formulated to be dissolved separately in water and then combined in the reservoir.
What is CANNA Aqua Flores A+B used for?
Aqua Flores A+B is a two-part mineral fertiliser for the flowering stage in recirculating hydroponic systems, such as NFT and ebb and flow. Parts A and B are dissolved separately in water and combined in the reservoir.
The formula provides phosphorus, potassium and chelated trace elements, designed for the flowering stage. It also contains pH stabilisers, silicon, and humic and fulvic acids.
The two parts remain separate in the packaging because, in their concentrated form, they could react with each other: they must be kept separate until diluted.
Technical data sheet
| Two-phase mineral fertiliser for flowering | |
| 30 ml of A and 30 ml of B per 10 L (3 ml/L each; 1:333) | |
| From the onset of flower formation; regular replacement of the solution | |
| Dilute A first, then B; pH 5.2–6.2 | |
| Recirculating hydroponics; hard or soft water depending on the variant |
Formulation and product selection
Aqua Flores is used during the flowering stage, when the ratio of nutrients required by the plant changes. During the vegetative stage, Aqua Vega is the product of choice, as it supports growth.
In a recirculating system, the solution returns to the tank and is reused: the composition of the water and the frequency of tank changes are just as important as the dosage.
The AQUA system is specifically designed for recirculation and should not be confused with solutions intended for drain-and-run systems.
Effects on the plant and flowers
During flowering, the plant requires less nitrogen and more potassium and phosphorus. Aqua Flores provides these elements alongside chelated microelements to promote fruit development and abundant flowering. The formula also contains silicon and humic and fulvic acids.
The switch to Aqua Flores should be made when the flowers begin to form, for a period of 1–3 weeks with 12 hours of light. Although the formula contains pH stabilisers, the pH level should be checked after preparation.
Directions for use
Shake the bottles and fill the reservoir with water. Add 30 ml of Part A per 10 L, mix, then add 30 ml of Part B to the same 10 L.
The target pH is between 5.2 and 6.2. Check the solution after preparation and adhere to the tank refresh schedule.
As recirculation returns water and nutrients to the system, pH and EC checks must be carried out regularly, not just at the time of preparation.
Related products
- CANNA Aqua Clay Pebbles — A mineral substrate made from expanded clay granules, designed for hydroponic systems.
- CANNA Boost Accelerator — Supports flower development and the plant’s metabolism during the flowering stage.
CANNA: research and programmes for every growing medium
Since the early 1990s, CANNA has been developing fertilisers and growing media for growers using soil, coconut fibre or hydroponics. Its approach stems from a practical question: what changes when the growing medium changes? This has led to the creation of distinct product ranges, comprising basic nutrients and complementary products designed to be used in sequence. Research, testing and consultation with growers are integral to the company’s history, which aims to make the choice of programme – from the first nutrient to the additives – as straightforward as possible.
CANNA states that it carries out research, laboratory testing and formulation development in-house. According to its presentation, the development of a new product takes on average around two years: a process that involves the design of specific ranges for different growing media and cultivation systems.
CANNA Grow Schedule: Aqua
Download the original fact sheet
| Stage | Weeks | Hours of light | Aqua Vega A+B | Aqua Flores A+B | Rhizotonic | Cannazym | Cannaboost | PK 13/14 | EC+ (mS/cm) | Total EC (mS/cm) |
|---|---|---|---|---|---|---|---|---|---|---|
| Growth | ||||||||||
| Start / rooting (3–5 days) | <1 | 18 | 15–25 | – | 40 | – | – | – | 0.7–1.1 | 1.1–1.5 |
| Vegetative phase I | 0–3 | 18 | 20–30 | – | 20 | 25 | – | – | 0.9–1.3 | 1.3–1.7 |
| Vegetative phase II | 2–4 | 12 | 25–35 | – | 20 | 25 | 20 | – | 1.2–1.6 | 1.6–2.0 |
| Flowering | ||||||||||
| Generative period I | 2–3 | 12 | – | 30–40 | 5 | 25 | 20–40 | – | 1.4–1.8 | 1.8–2.2 |
| Generative period II | 1 | 12 | – | 30–40 | 5 | 25 | 20–40 | 15 | 1.6–2.0 | 2.0–2.4 |
| Generative period III | 2–3 | 12 | – | 20–30 | 5 | 25 | 20–40 | – | 1.0–1.4 | 1.4–1.8 |
| Generative period IV | 1–2 | 10–12 | – | – | – | 25–50 | 20–40 | – | 0.0 | 0.4 |
Dosage in ml per 10 litres of water. Add the EC of tap water to the recommended EC. Recommended pH as per the original data sheet.
Recalculation in progress … 