CANNA - CANNA FLUSH
CANNA Flush is a product designed to remove excess accumulated nutrients from the growing medium and plants, which can cause over-fertilisation or malnutrition. It can be used with any type of growing medium and cleanses without eliminating the beneficial bacteria or fungi present in the medium.
What is CANNA Flush used for?
CANNA Flush is a solution for rinsing the growing medium and removing accumulated excess nutrients. It is used in the flushing procedures recommended by CANNA.
The method varies between recirculating and free-drainage systems, and between soil, coconut fibre and inert growing media.
Rinsing is intended to manage the growing medium, not to replace nutrition: resuming fertilisation is a separate step.
Technical data sheet
| Substrate rinse solution | |
| Soil: 20 ml/10 L; hydroponic/inert systems: 40 ml/10 L according to protocol | |
| Rinse or end of cycle, depending on the system | |
| Irrigation and drainage; follow the system’s protocol | |
| CANNA substrates and systems as per instructions |
Formulation and product selection
In the pot, what matters is how the solution passes through the root zone and drains away. In the system, what matters is the planned management of the growing medium and reservoir.
Before taking any action, it is advisable to understand the cause of salt build-up, as the frequency and concentration of treatment must be consistent with this.
Directions for use
For soil-based substrates, the dose is 20 ml per 10 L of water; for hydroponic systems using inert media, it is 40 ml per 10 L. Follow the guide’s complete sequence: drainage, rinsing with water and subsequent resumption of nutrition.
Do not use the product simply as an addition to the nutrient solution: a flushing procedure has its own specific sequence.
Related products
- CANNACURE — A foliar treatment available in concentrated or ready-to-use versions, depending on the format.
- CANNAZYM — An enzyme complex for the growing medium.
CANNA: research and programmes for every growing medium
Since the early 1990s, CANNA has been developing fertilisers and growing media for growers using soil, coconut fibre or hydroponics. Its approach stems from a practical question: what changes when the growing medium changes? This has led to the creation of distinct product ranges, comprising basic nutrients and complementary products designed to be used in sequence. Research, trials and consultation with growers are integral to the company’s history, which aims to make the choice of programme clearer, from the first nutrient right through to the additives.
CANNA states that it carries out research, laboratory testing and formulation development in-house. According to its presentation, the development of a new product takes on average around two years: a process that involves the design of specific product ranges for different growing media and cultivation systems.
CANNA Flush is a product designed to remove excess accumulated nutrients from the growing medium and plants, which can cause over-fertilisation or malnutrition. It can be used with any type of growing medium and cleanses without eliminating the beneficial bacteria or fungi present in the medium.
What is CANNA Flush used for?
CANNA Flush is a solution for rinsing the growing medium and removing accumulated excess nutrients. It is used in the flushing procedures recommended by CANNA.
The method varies between recirculating and free-drainage systems, and between soil, coconut fibre and inert growing media.
Rinsing is intended to manage the growing medium, not to replace nutrition: resuming fertilisation is a separate step.
Technical data sheet
| Substrate flushing solution | |
| Soil: 20 ml/10 L; hydroponic/inert systems: 40 ml/10 L according to protocol | |
| Rinse or end of cycle, depending on the system | |
| Irrigation and drainage; follow the system’s protocol | |
| CANNA substrates and systems as per instructions |
Formulation and product selection
In the pot, what matters is how the solution passes through the root zone and drains away. In the system, what matters is the planned management of the growing medium and reservoir.
Before taking any action, it is advisable to understand the cause of salt build-up, as the frequency and concentration of treatment must be consistent with this.
Directions for use
For soil-based substrates, the dose is 20 ml per 10 L of water; for hydroponic systems using inert media, it is 40 ml per 10 L. Follow the complete sequence outlined in the guide: drainage, rinsing with water and subsequent resumption of nutrition.
Do not use the product simply as an addition to the nutrient solution: a flushing procedure has its own specific sequence.
Related products
- CANNACURE — A foliar treatment available in concentrated or ready-to-use versions, depending on the format.
- CANNAZYM — An enzyme complex for the growing medium.
CANNA: research and programmes for every growing medium
Since the early 1990s, CANNA has been developing fertilisers and growing media for growers using soil, coconut fibre or hydroponics. Its approach begins with a practical question: what changes when the growing medium changes? This has led to the creation of distinct product ranges, comprising basic nutrients and complementary products designed to be used in sequence. Research, trials and consultation with growers are integral to the company’s history, which aims to make the choice of programme – from the first nutrient to the additives – clearer.
CANNA states that it carries out research, laboratory testing and formulation development in-house. According to its presentation, the development of a new product takes on average around two years: a process that involves the design of specific product ranges for different growing media and cultivation systems.
CANNA Flush is a product designed to remove excess accumulated nutrients from the growing medium and plants, which can cause over-fertilisation or malnutrition. It can be used with any type of growing medium and cleanses without eliminating the beneficial bacteria or fungi present in the medium.
What is CANNA Flush used for?
CANNA Flush is a solution for rinsing the growing medium and removing accumulated excess nutrients. It is used in the flushing procedures recommended by CANNA.
The method varies between recirculating and free-drainage systems, and between soil, coconut fibre and inert growing media.
Rinsing is intended to manage the growing medium, not to replace nutrition: resuming fertilisation is a separate step.
Technical data sheet
| Substrate rinse solution | |
| Soil: 20 ml/10 L; hydroponic/inert systems: 40 ml/10 L as per protocol | |
| Rinse or end of cycle, depending on the system | |
| Irrigation and drainage; follow the system’s protocol | |
| CANNA substrates and systems as per instructions |
Formulation and product selection
In the pot, what matters is how the solution passes through the root zone and drains away. In the system, what matters is the planned management of the growing medium and reservoir.
Before taking any action, it is advisable to understand the cause of salt build-up, as the frequency and concentration of treatment must be consistent with this.
Directions for use
For soil-based substrates, the dose is 20 ml per 10 L of water; for hydroponic systems using inert media, it is 40 ml per 10 L. Follow the complete sequence outlined in the guide: drainage, rinsing with water and subsequent resumption of nutrition.
Do not use the product simply as an addition to the nutrient solution: a flushing procedure has its own specific sequence.
Related products
- CANNACURE — A foliar treatment available in concentrated or ready-to-use versions, depending on the format.
- CANNAZYM — An enzyme complex for the growing medium.
CANNA: research and programmes for every growing medium
Since the early 1990s, CANNA has been developing fertilisers and growing media for growers using soil, coconut fibre or hydroponics. Its approach stems from a practical question: what changes when the growing medium changes? This has led to the creation of distinct product ranges, comprising basic nutrients and complementary products designed to be used in sequence. Research, trials and consultation with growers are integral to the company’s history, which aims to make the choice of programme clearer, from the first nutrient right through to the additives.
CANNA states that it carries out research, laboratory testing and formulation development in-house. According to its presentation, the development of a new product takes on average around two years: a process that involves the design of specific product ranges for different growing media and cultivation systems.
Recalculation in progress …